manualshive.com logo in svg

Vivato VA2200, Руководство пользователя

Поделиться
Скачать
Vivato VA2200 Скачать руководство пользователя страница 13

Copyright © 2004, Vivato, Inc.

Vivato Wi-Fi AP/Bridge User Guide

13

Contact Information

Safety Information

Contact Information

For customer support

:

For technical support, contact your Vivato reseller or visit the Vivato Customer Support website.

 

 

Go to www.vivato.net and select the 

Customer Support

 link. Enter the required information for setting 

up a user account. A support password is e-mailed to you after validating the information. You can then 
search the online knowledge base for information by clicking on “

Find Answers / Questions

”. You can 

also access that latest firmware downloads and user documents from the support site.

 

To provide feedback on our documentation

:

Feedback on the documentation shipped with the Vivato Wi-Fi Wi-Fi  AP/Bridge is greatly appreciated, 
and will always be reviewed by our Technical Publications department. Please send your suggestions to 

[email protected]

 or click on the “

Send Documentation Feedback

” link at the bottom 

of each online documentation page on the Vivato CD. (Please use the Customer Support link mentioned 
above for product support issues.)

Содержание VA2200















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды