Vivat D-26, Руководство пользователя

Страница: 5 / 13

5
4. Preparation for work
Set the device on a hard flat surface.
On the back of the Vivat Turn Table there are connectors for camera – “Camera”, power –
“220/110V”, battery “12V”, service USB port “Service” and power switch – “On/Off”.
Connect the power cord connector “220/110V”, or battery cable to “12V” and sync cable from
camera to connector “Camera”. The connecting of the camera to Vivat Turn Table must be
performed when the power is off. The plug of the sync cable should be fixed into the housing
unit.
5. Operation of the Vivat Turn Table
5.1. The controls
On the front panel of the Vivat Turn Table there are: LCD screen, control buttons and IR
remote receiver.
The LCD screen displays information about the operating mode, settings and status of the
program.
"Left" and "right" buttons are used for the menu navigation, "up" and "down" change the
settings, "center” button uses to confirm.