8
2.1 Resetting the Remote Handset
The reset function restores the remote handset to the original factory settings. This
cancels
ALL
the data stored in the remote handset’s memory, such as associations
between the handset and the peripheral devices, the Z-Wave network in use, etc.
This procedure is useful in a number of situations, especially before creating a new
network: in this case, if the remote handset has previously been utilized with other
Z-Wave networks, it is important to perform a total reset before creating a new network.
This procedure is designed to prevent any possibility of malfunctions.
Proceed as follows to perform a total reset:
Press and hold down the
•
“Exc”
button on the rear of the remote handset. The
corresponding LED will light
YELLOW
.
