18
Select a group or a scenario by pressing the corresponding button on the front
•
panel of the remote handset. The button will be backlit in
BLUE
.
Place the remote handset at a distance of not more than 2 metres from the
•
peripheral device which is to be associated to the group or scenario and press one
of the buttons on the peripheral device (or press the desired button if the peripheral
device has more than one key). If the remote handset detects the peripheral device
correctly, the LED relative to the
“Asc”
button will flash
GREEN
.
Repeat this procedure for all the peripheral devices to be associated with the
•
selected group or scenario.
When the procedure has been completed (or simply to exit the association
•
procedure), press the
“Asc”
button until the corresponding LED switches off.
Each time you wish to control the peripheral devices associated with a group or
with a scenario, it will now be sufficient to press the button relative to that group or
scenario, which will then be backlit in
BLUE
.
Now the control button (See paragraph 1) can be used to switch the lights
•
ON
and
OFF
or to
ADJUST
the level of light by pressing on the UP and DOWN arrows.
In order to switch off all the peripheral devices completely, press and hold down the
“
ALL-OFF
” button for at least 2 seconds (See paragraph 1).
