Vitrum Home Master, Инструкция по эксплуатации

Страница: 15 / 24

15
On the rear of the remote handset, press and hold down the •
“Asc”
key until
the corresponding LED lights YELLOW .
Place the remote handset at a distance of not more than 2 metres from the •
peripheral device which is to be controlled . Press the desired button on the
peripheral device. If the remote handset detects the peripheral device, the LED
relative to the
“Asc”
button will flash
GREEN
three times. If this is not the
case, again press the button on the peripheral device.
If necessary, repeat this procedure for all the buttons on peripheral devices to
•
be controlled.
At this point, it is necessary to set up the unit that will be used to control the
•
peripheral device(s) selected as above. To do so, press the
“Asc”
button: the
relative LED will light RED .
Place the remote handset at a distance of not more than 2 metres from the •
peripheral device which
is to control
the other devices. Press the desired
button on the peripheral device. If the procedure is completed correctly, the
LED relative to the
“Asc”
button will flash
GREEN
. In this case, the remote
handset automatically exits “association” mode.
To exit “association” mode manually, simply press and hold down the
•
“Asc”
button until the
YELLOW
LED switches off.