VITRA Xero Frame L, Руководство по сборке и эксплуатации

Страница: 3 / 14

3
Xero Frame P/L
v
1/2018 (EN) 1/2018 (EN)
EN
1 Safety
1.1 explanation of symbols
Safety instructions are marked as follows in these
instructions.
⚠
WARNING
a safety instruction marked in this manner indi-
cates a possible dangerous situation, which if not
prevented may result in death or severe injury.
⚠ NOTE
a safety instruction marked in this manner indi-
cates a possible dangerous situation, which if not
prevented may result in damage to property and
the environment.
1.2 Intended use
The product serves exclusively for fitting merchandise
supports for the presentation of goods and for mounting
commercial power tracks (230 V).
Merchandise supports and electrical devices permitted
are exclusively those that conform to the specification
in these instructions.
Field of application
The product must be used exclusively in the commercial
field.
Personnel
These instructions describe the assembly of the product
as well as its handling and cleaning. Therefore these
instructions must be handed on to the end user after
assembly of the product.
The contents of the section on “Assembly” is directed
at personnel, who undertake the assembly and the elec­
trical connection (e.g. shop fitters, licensed electricians).
The contents of the section on “Handling” is directed at
the end users (e.g. sales personnel, visual merchandisers).
misuse
⚠ WARNING
In the event of misuse, there is the danger that the
merchandise supports and the electrical devices
will be damaged. This may lead to injury and da-
mage to the product.
> Use only approved accessories and electrical
devices.
> Comply with the permitted connection, maxi-
mum load and equipment values.
> Do not lean any ladders against the merchandi-
se supports.
1.3 Fundamental dangers
⚠
WARNING
>
Do not load the merchandise supports above
the maximum load capacity.
>
Do not place any receptacles, from which fluids
can escape, on the merchandise supports.
>
Keep moisture away from current conducting
components.
2 Product description
2.1 overview
Xero Frame P/L is a frame system for the wall and central
space and is used for fitting merchandise supports on
which products are presented.
Fig. 1: Xero Frame P/L
2.2 Brief description
Xero Frame P/L consists of electrified and non­electrified
frames with various axes and heights. The merchandise
supports can be hung on both sides of the frame.
The frame is fixed on the wall or free­standing on a flat
panel or H­frame base. Free­standing up to a maximum
height of 1400 mm.
The frame is available, both in the electrified and non­
electrified versions, in 3 different axes (617.5/992.5 and
1242.5 mm) and 5 different heights from 620 to 2370 mm.
Fig. 2: Frame
The frames are supplied partially assembled in flat
packs. When assembling the electrified frames, the po­
wer cables are fed through the opening in the frame.