Vitesse VITM4-2CH, Руководство по эксплуатации продукта

Страница: 2 / 8

2
•
All wiring should be mains rated.
•
Remove wiring compartment cover. Wire the box using the diagrams
below
On/off 1 and On/Off 2 connect switches through to detectors
Switched live turns the lights on and off
•
Use the cable clamps to secure the wiring or use cable glands (not
supplied). The clamps can be split, and flipped over to clamp
different cable diameters.
•
Replace wiring compartment cover.
•
Plug in the luminaires ensuring that the connector latches to the box.
•
The unit MUST be installed orientated as per the arrow to ensure
good lock of cable plug to socket!
Small
cables
Large
cables
Cable clamps
Permanent Live
Neutral - Supply in
Earth
Live 1 - Switched
Live 2 - Switched
On / Off 1
On / Off 2
Live 1 - Supply in
Live 2 - Supply in
Local lighting switch and local emergency test switch
N E L
Local emergency
test switch
Local lighting
switch 1
Emergency test using central switch
N E L
Multiple boxes
DO NOT WIRE ACROSS
PHASES
Central
emergency test
switch
A local lighting switch may still be used when there
is a central emergency test switch or when a circuit
breaker is used to interrupt the power.
Wire link
N E L
Wire link
Wire link
Channel 1 Channel 2
Local lighting
switch 2
Emergency test using power interruption
Wiring
Wiring using single supply
Luminaire connections / Lead colours
Permanent Live Black (4 core only)
Neutral Blue
Earth Green / Yellow
Switched Live Brown
Install this way up