26
27
This camera has a very useful and powerful feature, POINTING ZOOM, which
can zoom in/out any area.
POINTING ZOOM is the ability to zoom into an off center location using the PTZ
Zoom in/out feature when connected via RS485
Use H-POINTER and V-POINTER to move the Yellow box to set the position of
the center of the Zoom.
UNLIKE the conventional zoom which can zoom in/out the center area of image
only, the flexible zoom location and area, POINTING ZOOM differentiates
its usefulness from others.
That is, a conventional camera installed in the corner of the ceiling can zoom the
center of the floor in a room and result in losing the image of door on the side
wall. However, POINTING ZOOM can be set to see the door side and zoom in
that area without missing the IMPORTANT security point.
▐ POINTING ZOOM
• H-POINTER (10):
Sets the horizontal location of area to be zoomed by POINTING ZOOM.
• V-POINTER (10):
Sets the vertical location of area to be zoomed by POINTING ZOOM.
Set D-Zoom Pointer
H-POINTER
V-POINTER
RETURN
10
10
RET
Operating Instructions
