18
19
Operating Instructions
: Used when DAY or NIGHT is determined by light level through the lens and
DAY from/to NIGHT is switched automatically by the scene brightness.
D↔N THRESHOLD, D↔N DELY and SMART (DYNAMIC) IR can be set in the
menu. When EXPOSURE>AGC is less than 10, DAY/NIGHT AUTO is disabled
and forcibly switches to ___(DAY) to avoid malfunction. EXT, B/W (NIGHT)
and COLOR (DAY) is independent on AGC level. When EXTERNAL IR LED
is used with NON IR LED model, please set to IR LED MODE ON.
: DAY or NIGHT is determined by the built-in light photo sensor.
Camera with IR LED must be set to EXT.
DAY/NIGHT is used to control the setting during day-time and night-time operation.
Select the mode according to the lighting conditions and the camera type.
SMART (DYNAMIC) IR can be set to reduce the saturation by strong IR illumination
at night in any menu. Setting SMART (DYNAMIC) IR in any menu is identically
applied to other menu. Zero(0) turns off SMART (DYNAMIC) IR and High setting
decreases the saturation but the corners will be darker accordingly. IR LED Control
(AUTO/OFF) is available with IR LED model only. If IR LED is set to OFF, IR LED
will be turned OFF but DAY or NIGHT is still determined by the built-in light
photo sensor.
• D↔N THRESHOLD (0~20):
Sets the threshold level switching from/to DAY(color) or NIGHT(B/W).
Setting at a low level makes the camera enter NIGHT at a lower light level.
High level makes the camera exit NIGHT at a higher light level.
• D↔N GAP (0~15):
Sets the gap level switching from/to DAY(color) or NIGHT(B/W).
5-1. EXT
5-2. AUTO
5. DAY / NIGHT
DAY/NIGHT AUTO
D<->N THRESHOLD
D<->N GAP
D<->N DELAY
SMART IR
RETURN
5s
RET
|:::::::|::::::| 10
|:::::::|::::::| 10
|:::::::|::::::| 10
