22
23
Operating Instructions
• STAY ZOOMING : Sets the duration time for zooming by Motion.
: Detects and compensates the white pixels which become defective.
Once CALIBRATE is selected, the pixel calibration is initiated with lens closed
and cannot be cancelled. (See page 25 for additional details/instructions.)
7-4. PIXEL DEFECT
(default: OFF)
: Camera title (name) can be set and edited up to 15 alpha numeric and symbolic
characters from ASCII codes (ENGLISH only). ▲,▼,
◀
,
▶
moves the cursor to
next input. Choose a character and ‘
☟’
selects it. The selected characters are
added and displayed on the top left Corner and the cursor moves right
automatically for next input.
7-5. TITLE SET
※
SMART MOTION ZOOM does not work in low light conditions and BW.
• THRESHOLD : Defines the level of detection.
Be sure to set the value so that the pixels are uniformly blinking over the entire
screen. Too low of a value will get a bad results because too many pixels are
detected as bad pixels and the maximum number of pixels for compensation
will be filled by the upper area.
• EXECUTE ‘
☟’
: Long pressing will execute the pixel calibration for the detected
pixels. Menu will exit automatically after compensation.
• Set the direction of video by MIRROR/FLIP before setting SMART MOTION
ZOOM. Otherwise ZOOM TARGET could be different from your intention.
CAUTION
• SP - Space is inserted when pressed ‘●’
• BS – Cursor moves back when pressed ‘●’
• CLR – Clears all the characters on input line when pressed ‘●’.
• POS – To be able to set the title position by ▲,▼,
◀
,
▶
and ●.
: Enables or disables the OSD display.
• ID : ON enables camera ID display defined by SYSTEM>COMM.
SETUP>CAM ID.
• TITLE : ON enables camera ID display set by SPECIAL>TITLE SET.
7-6. DISPLAY
