VT-PTZ12WH
38
When the dome camera is installed near a wall or on a corner, panning range can be
limited by user.
3.5.
5
TILT LIMIT (
MENU
=> SETUP => TILT LIMIT)
Turn Tilt Limit OFF to the allow the camera to have full range of tilting ability from 0 ot
180 degree.
Turn Tilt Limit On to limit the tilting range by up to +10 degree on both ends.
During zoom-out operation the tilting range is increased slightly by additional
+10 degree.
3.5.
6
CALIBRATION (
MENU
=> SETUP => CALIBRATION)
RESET ORIGIN : Calibrate the ORIGIN point.
OFFSET ORIGIN : Adjust the small amount of position error from re-
installation.
ACTIVE OFFSET : Apply the adjustment above or not
AUTO CALIBRATION : ON – When position error detected, recover
automatically.
OFF – Disregard the position error.
3.5
.
7
LINE LOCK CONTROL (
MENU
= SETUP => LINE LOCK CONTROL)
PAN RANGE SETUP
RIGHT LIMITE : 000.0
LEFT LIMT : 007.2
ENABLE : ON / OFF
SWAP RIGHT LEFT
SAVE AND EXIT
CALIBRATION
RESET ORIGIN
ORIGIN OFFSET : 000.0 , 000.0
ACTIVE OFFSET : DISABLE/ENABLE
AUTO CALIBRATION : OFF
SAVE AND EXIT
LINE LOCK SETUP
MODE : INTERNAL
PHASE : (0~359)
Содержание VT-PTZ12WH
Страница 4: ...VT PTZ12WH 3 WARNING AND CAUTION...
Страница 12: ...VT PTZ12WH 11 2 5 Connecting Both Speed Dome and DVR via J box Figure 5 Connecting Camera DVR into Controller...
Страница 15: ...VT PTZ12WH 14...
Страница 48: ...28492 Constellation Road Valencia ca 91355 WWW VITEKCCTV COM Version 1 12 2014...