Vitek VT-PTZ12WH, Руководство пользователя

Страница: 27 / 48

VT-PTZ12WH
26
Follow the steps below to program Scans.
1. Press the
SCAN
key to enter Auto Scan menu directly. ( Or
MENU
=>
FUNCTIONS => SCAN) .
2. Select an Auto Scan number by moving the
Joystick
left or right.
3. Highlight the title and twist the
Joystick
to edit the title by scrolling through the
alphanumeric characters and move the handle to the right or left to move to the
next space. Press
ENTR
key or move the
Joystick
down to finish title mode.
4. When finish entering the title, highlight “START” with the
Joystick and twist
CCW or CW .
Current panning position will be displayed. Select start potion then
Press Focus button to complete the selection of the start position.
5. Highlight "END" and repeat step 4 to enter end position. (Or hit zoom button to
start PTZ control and hit the Focus button to stop.)
6. Move the joystick and select "SPEED" set the speed by twisting the
Joystick
clockwise or counterclockwise or move the
Joystick
left/ right to select the
auto scan speed.
7. Move the
Joystick
downward to select direction of rotation. Tap
Joystick
left/ right or twist CCW/CW to select direction of Scan.
8. Move the
Joystick
downward to swap. This will switch the start and end
position. Tap
Joystick
left/ right or twist CCW/CW to swap the start and end
position
Pressing the
HOME
or
OFF
button to delete stored data, 000 will be displayed
immediately.