VT-PTZ Series
6
SAFETY PRECAUTIONS
z
Before using the Xpress Dome, please ensure that you read and understand the
safety precautions described below. Always ensure that the Xpress Dome is
operated correctly.
z
The safety precautions noted on the following pages are intended to instruct you
in the safe and correct operation of the Xpress Dome and its accessories to
prevent injuries or damage to the self, other persons and equipment.
z
In this Instruction Manual, the term “Speed Dome”, “equipment” and “device”
refers primarily to the Xpress Dome and its accessories such as power supply
and its remote controller.
WARNING
z
Do not cover the ventilation opening or slots on the outer casing. To prevent the
Speed Dome from overheating, provide at least two inches of air space around
the vent and the slots.
z
Do not drop metallic parts through slots. This could permanently damage the
Speed Dome. Immediately turn the Speed Dome’s power off or unplug the
power cord from the power outlet. Contact a qualified service personnel
authorized by the equipment distributor or a Vitek customer help desk.
z
Do not attempt to disassemble or alter any part of the equipment that is not
expressly described in this guide. Disassembly or alteration may result in high
voltage electrical shock. Internal inspections, alterations and repairs should be
conducted by qualified service personnel authorized by the equipment distributor
or Vitek customer help desk.
z
Stop operating the equipment immediately if it emits smoke or noxious fumes.
Failure to do so may result in fire or electrical shock. Immediately turn the
Speed Dome’s power off, remove the power cable from the power outlet.
Confirm that smoke and fume emissions have ceased. Please consult the
Speed Dome distributor or the closest Vitek customer help desk.
z
Stop operating the equipment if a heavy object is dropped or the casing is
damaged. Do not strike or shake. Failure to do so may result in fire or electrical
shock. Immediately turn the Speed Dome’s power off or unplug the power cord
from the power outlet. Please consult the Speed Dome distributor or the closest
Vitek customer help desk.
z
Do not allow the equipment come into contact with, or become immersed in,
water or other liquids. Do not allow liquids to enter the interior. The Xpress
Dome has not been waterproofed. If the exterior comes into contact with liquids
or salt air, wipe it dry with a soft, absorbent cloth. In the event that the water or
other foreign substances enter the interior, immediately turn the Speed Dome’s
Power off or unplug the power cord from the power outlet. Continued use of the
equipment may result in fire or electrical shock. Please consult the Speed Dome
distributor or the closest Vitek customer help desk.
