VT-PTZ Series
43
3) Move the joystick to the right and twist
the joystick to select the pattern
program.
4)
Select from the three available
speeds, F (Fast), M (Medium) and S
(Slow) for the camera to move to the
beginning
of the pattern. The default
is F.
5) Select the dwell time for the camera
to stay at the view
after
the pattern
program has run. The default is 3
seconds. Available dwell time is from
1 to 99 seconds.
6) Repeat steps 1 through 5 for additional PATTERN programs to be run. Please
note that the pattern programs
must
be preprogrammed before they can be
included in the TOUR.
3.1.5.3 Programming a Tour with Scan Programs.
1) Select an empty location.
