23
Table 2.3.1. Menu Items in Recording Mode Setup
Menu item
Description
CHANNEL
Select a channel for applying the following settings using the control button. Press SEL
button to change the setting value of all channels at once. Once you select an item, then
press SEL to set value for all channels.
Use virtual keyboard for all setting on one screen as you want as bellow picture.
RESOLUTION
Set the resolution for the specified channel.
•
D1, Half D1 and CIF for analog channels (1~8ch)
•
1920x1080, 1920x540, 1280x720, 640x360 for HD channels (9~10ch)
FRAME RATE
Set the frame rate for the specified channel. The sum of the frame rate values from each
channel cannot exceed the maximum frame rates for a specific recording resolution.
Typical values of the maximum frame rate for video are
•
D1@240/200 fps for 8 analog channels (1~8ch)
•
1080p@30/25fps or 720p@60/50fps for 2 HDcctv channels (9~10ch)
* It is not possible to use 1080p camera and 720p camera at the same time.
QUALITY
Select the recording quality for the specified channel. Options are: Economy, Standard,
High and Super.
RECORDING
Assign the recording mode for each channel. Options are: Continuous, By Motion, By
Sensor, By Schedule or Disable.
SENSOR
RECORDING
Enable setting up to 4 sensors for the specified channel using the control button.
PRE RECORD
Enable/disable pre-event recording. Pre-event recording time is 15 seconds to 20
minutes(Selectable)
POST EVENT
RECORD
Set the post event recording time duration for the specified channel. (10-30 seconds)
AUDIO
Enable/disable audio recording for the specified channel.
SCHEDULE
Set the recording schedule. Press SEL to go to schedule setup screen.
