manualshive.com logo in svg

Vitek VT-DVR, Руководство пользователя

Поделиться
Скачать
Vitek VT-DVR Скачать руководство пользователя страница 67

 

VITEK VT-DVR Series 

66

6.  TIME AND DATE SETUP 

 

        

 

 

If there is a need to adjust the time and the date (e.g. Daylight Savings Time or 
migrating to a different location or country), access the Time/Date setup menu to enter 
the correct values.  Press the Menu button to save the new value and exit to the main 
menu.   
 
If for some reason the date and the time were entered so that it conflicts and overlaps 
previously entered date and time, the DVR will not overwrite the older data.  Instead, a 
new copy of the data with the same date and time will be created on another part of the 
DVR’s internal storage.  When the user plays back the data from the hard drive, the 
DVR will playback the older data with the same date and time first, then the newer data 
second.   
 
 
 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Содержание VT-DVR



























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды