6
ENGLISH
•
Use the unit only on healthy undyed and not permed
hair or use it along with special hair straightening
products.
•
If your hair has been dyed or permed, use the unit
rarely.
•
For the best results the hair should be clean and dry.
•
Open the hair straightener pressing the clamp (1).
•
Put the unit on a flat steady and heat-resistant sur-
face.
•
Insert the plug into the mains socket.
•
Switch the unit on by pressing and holding the on/off
button (2), the default heating plates (4) temperature
«160» will light up and start flashing.
Note: During the first operation some smell from the
heating element is possible, this is normal.
•
If necessary, set the required heating plates tempera-
ture by pressing the buttons (3).
Hair type
Temperature
Damaged, colored, bleached,
fine
160 °С
Normal
180 °С
For professional styling
from 200 °С to +220 °С
•
When the heating plates (4) heat up to the set tem-
perature, the temperature indicator (5) will stop flash-
ing and will be glowing constantly.
•
Divide combed hair into locks of equal width (about
5 cm).
•
Place the hair lock between the plates (4).
•
Hold the unit by its handle and press the plates (4)
together.
•
Slide the heating plates (4) with little force to the
hair tips.
IMPORTANT: do not keep the plates on the same area
of the hair lock for more than 2 seconds.
•
After that start straightening the next hair lock.
•
Cool your hair down before final styling or applying
hair spray.
•
Avoid contact of heated surfaces with your face, neck
and other parts of your body.
IM VT-8411_70x130.indd 6
24.11.2017 14:50:30
