6
ENGLISH
•
Before plugging the unit in make sure that the oper-
ating voltage of the unit corresponds to the voltage
of your mains.
•
The unit is intended for operation from an AC power
network with the frequency of 50 or 60 Hz. The unit
does not need any additional settings for operating
with the required rated frequency.
HAIR STRAIGHTENING
•
The unit can be used for both long and short hair.
•
Use the unit only on healthy undyed and not permed
hair or use it along with special hair straightening
products.
•
If your hair has been dyed or permed, use the unit
rarely.
•
For the best results the hair should be clean and dry.
•
Open the hair straightener moving the clamp (1) to
the position «
».
•
Put the unit on a flat steady and heat-resistant sur-
face.
•
Insert the plug into the mains socket, the «OFF» sym-
bols will appear on the display (5).
•
Switch the unit on by pressing and holding the on/off
button (2) «
», the default heating plates (4) tem-
perature «180°С» will be flashing on the display (5).
Note: During the first operation some smell from the
heating element is possible, this is normal.
•
If necessary, set the heating plates temperature by
pressing the buttons (3) «
t
/
u
».
Hair type
Temperature
Damaged, colored,
bleached, fine
from +120°С to +140°С
Normal
from +160°С to +180°С
For professional styling
from +200°С to +220°С
•
When the heating plates reach the set temperature,
the temperature digital symbols will glow constantly.
•
Divide combed hair into locks of equal width (about
5 cm).
•
Place the hair lock between the plates (4).
•
Hold the unit by its handle and press the plates (4)
together.
IM VT-8286.indd 6
2/3/20 10:10 AM
