Vitek VT-8247, Инструкция по эксплуатации

Страница: 7 / 40

7
ENGLISH
•
Clean the air inlet grid (6) with a brush.
•
Never immerse the unit into water or any other liquids.
•
Do not use abrasives and solvents to clean the unit body.
STORAGE
•
Disconnect the unit from the mains and clean it.
•
Do not wind the power cord around the hot air styler, as this
can damage the cord or the unit body. Handle the power
cord with care, do not pull, twist or stretch it, especially
near the power plug or at the junction point. Straighten the
cord periodically if it gets twisted during the hot air styler
operation.
•
For easy storing there is a hanging loop (7), you can hang
the hot air styler on this loop provided that no water gets on
the unit in this position.
•
Keep the unit in a dry cool place out of reach of children and
disabled persons.
DELIVERY SET
Hot air styler – 1 pc.
Thermal brush 20 mm in diameter – 1 pc.
Thermal brush 33 mm in diameter – 1 pc.
Nozzle – 1 pc.
Manual – 1 pc.
Warranty certificate – 1 pc.
TECHNICAL SPECIFICATIONS
Power supply: 220-240 V ~ 50 Hz
Rated input power: 1000 W
ATTENTION! Do not use the unit near water in the bathrooms,
showers, swimming pools etc.
RECYCLING
For environment protection do not throw out the unit and
the batteries (if included), do not discard the unit and the