Vitek VT-8244, Инструкция по эксплуатации

Страница: 4 / 40

4
ENGLISH
•
The power cord may not:
– touch hot objects,
– run over sharp edges,
– be used for carrying the unit.
•
Check the power cord and power plug insulation integ-
rity periodically.
•
Do not switch the unit on in places where aerosols are
sprayed or highly flammable liquids are used.
•
Hair spray shall be applied only after hair styling is fin-
ished.
•
Do not operate the unit while taking a bath.
•
Never leave the operating unit unattended.
•
Do not touch the unit body, the power cord and power
plug with wet hands.
•
Do not place and do not keep the unit in places, where
it can fall into a bath or a sink filled with water, do not
immerse the unit into water or other liquids.
•
If the unit is dropped into water, unplug it immediately,
and only then take it out of the water.
•
Do not use the unit when you are drowsy.
•
Do not use the unit to style wet hair or synthetic wigs.
•
Avoid contact of heated surfaces with your face, neck
and other parts of your body.
•
Do not drop the unit.
•
Do not put the operating unit on heat-sensitive or soft
surfaces (for instance, bed or sofa) and do not cover it.
•
Do not direct hot air into your eyes or other heat-sensi-
tive parts of your body.
•
The attachments get hot during use. Allow them to cool
down before removal.
•
Never insert any foreign objects into any unit body
openings.
•
Never block the air inlets of the hot air brush,
do not place it on a soft surface (a bed or sofa), where
the air inlets may be blocked. Keep the air inlets free of
lint, dust and hair etc.
•
Avoid getting of hair into the air inlet grid during opera-
tion of the unit.
•
Clean the unit regularly.
•
Unplug the unit after every usage and before cleaning.
•
When unplugging the unit, pull the power plug but not
the power cord.
IM VT-8244_70x130.indd 4 09.01.2018 17:42:01