Vitek VT-6603 BK, Инструкция по эксплуатации

Страница: 8 / 48

8
ENGLISH
or (6) «ALM1/VOL +» , until the corresponding alarm
signal lights up.
Snooze
You can switch the alarm signal off for 9 minutes by press-
ing the button
(8) «SNOOZE/SLEEP» , in 9 minutes the
alarm signal will be repeated. You can repeat this procedure
during 1 hour.
Alarm switch off
•
To switch the alarm sound signal off press the button (7)
«
ALM OFF/ SOURCE / ».
Display brightness setup
•
Repeatedly press the button (4) «DIMMER» to set up
the necessary display (9) brightness.
Radio stations reception
•
Connect the unit to the mains and consequently press
the button (7) «
ALM OFF/ SOURCE / » to select the
necessary frequency range: FM or AM .
•
Use the buttons (2) «
9
/HR» or (3) «
:
/MIN» for tuning
in the desired radio station frequency.
Manual tuning: consequently press the buttons (2) « 9 /HR»
or (3) «
:
/MIN» for tuning in to the desired radio station
frequency.
Auto tuning: press and hold the button (2) « 9 /HR» or (3)
«
:
/MIN» for approximately one second. The tuner begins
scanning and automatically holds after receiving a strong
radio station signal.
•
To switch the radio off press and hold the button (7)
«
ALM OFF/SOURCE/ », the symbol « OFF » will appear
on the display, and after that the unit will be switched to
the current time mode.
•
For the best radio stations reception in the FM-range it
is recommended to unwind the FM-antenna (16) cable
and place it optimally.
•
Radio station reception in the AM range is performed
by the inner magnetic antenna. Change the clock radio
position for the best reception.
Note: Since different factors, such as clock radio
position in the room, number of floors etc, effect the
reception quality, we recommend placing the unit as
close to the window as possible for the best reception.
VT-6603_IM_70x130.indd 8 27.10.2017 10:24:29