7
ENGLISH
to set the first alarm.
Blinking alarm time digits and the
selected alarm indicator (12) or (10) will appear on the display.
•
Consequently press or hold the button (3) «
HOUR /
:
»
,
to set the alarm time in hours.
•
Consequently press or hold the button (2) «
MIN /
9
»,
to
set the alarm time in minutes.
•
To finish the setup procedure, press the button (5) «
AL2 /–
»
or (6) «
AL1/+
» respectively.
•
Press the button (5) «
AL2 /–
»
or (6) «
AL1 /+
», to select
the necessary alarm signal: sound signal («Buzzer»
symbol) or radio switch on («Radio» symbol).
Depending on your choice the corresponding indicator
will light up:
– the indicator (10) shows that the first alarm sound signal
is selected as an alarm signal;
– the indicator (11) shows that the radio is selected as the
first alarm signal;
– the indicator (12) shows that the second alarm sound
signal is selected as an alarm signal;
– the indicator (13) shows that the radio is selected as the
second alarm signal;
Notes:
– If you want to select the radio as an alarm signal,
preliminarily tune the required radio station (see
«Radio stations reception»).
– The alarm actuation is possible only when the unit is
connected to the mains.
– At the alarm actuation the volume level increases grad-
ually from minimal to maximal value within 10 seconds.
– If the button
(3) «HOUR /
:
»,
or
(2) «MIN /
9
»
is not
pressed within 5 seconds during setup process, the
unit will be switched back to the current time mode
.
Switching the alarm on/off
•
To switch the alarm (alarms) off in the current time mode
press the button (5)
«AL2 /–»
or (6)
«AL1/+»
conse-
quently, until the corresponding alarm indicators go out.
•
To switch the alarm (alarms) on in the current time mode
consequently press the button (5)
«AL2 /–»
or (6)
«AL1/+»
consequently, until the corresponding alarm signal lights up.
Snooze
You can switch the alarm signal off for 9 minutes by pressing
the button
(8) «SNOOZE/SLEEP»
, in 9 minutes the alarm
VT-6602_IM_70x130.indd 7
01.07.2015 12:49:09
