Vitek VT-2573, Инструкция по эксплуатации

Страница: 4 / 52

4
ENGLISH
–
be immersed into water,
–
run over sharp edges of furniture,
– be used as a handle for carrying the unit.
•
Use the unit to cut only natural human hair, hair
should be dry.
•
Do not use the unit to cut artificial hair and animal hair.
•
Use only the attachments supplied.
ATTENTION! Do not immerse the hair clipper, the
power cord and the plug into water or any other liquids.
Do not wash the clipper blades under water jet.
•
Do not touch the hair clipper body and the power
cord with wet hands.
• Do not use the unit outdoors.
•
Do not use the unit in places with high temperature
and relative humidity over 80%.
•
Do not switch the unit on in places where aerosols
are sprayed or highly flammable liquids are used.
•
Do not keep the unit near a bath or a sink filled with
water.
•
If the unit is dropped into water, unplug it immedi-
ately, and only then take it out of the water.
•
Never use the unit if the attachment combs are bro-
ken or damaged or if the blades are damaged.
• After each use clean the attachments and the blades
with the brush to remove the cut-off hair.
•
Make sure that the blades are clean and that there is
lubricating oil on them.
•
Never leave the operating unit unattended.
•
Switch the hair clipper off during intervals in opera-
tion or when you are not using it.
•
Do not allow children to use the unit as a toy.
•
Do not allow children to touch the hair clipper body
and the power cord during the unit operation.
• During the unit operation and breaks between oper-
ation cycles, place the unit out of reach of children
and disabled persons.
•
This unit is not intended for usage by children.
•
The unit is not intended for usage by physically or
mentally disabled persons (including children) or by
persons lacking experience or knowledge if they are
not under supervision of a person who is responsible
IM VT-2573_70x130.indd 4 05.03.2019 15:47:18