Vitek VT-2572 CR, Инструкция по эксплуатации

Страница: 5 / 28

ENGLISH
5
•
To avoid damages, transport the unit in
the original package only.
•
After unit transportation or storage at low
temperature keep it for at least three
hours at room temperature before switch-
ing on.
THIS UNIT IS INTENDED FOR HOUSEHOLD
USAGE ONLY
USING THE HAIR CLIPPER
•
Remove all stickers and packaging ele-
ments that can prevent unit operation.
Battery charging
Full charging of the accumulator is enough
approximately for 45 minutes of continuous
operation.
•
Switch off the unit, setting the power
switch (2) to the «OFF» position, connect
the plug of the power adapter cord (9) to
the support (6).
•
Place the hair clipper on the support (6)
and plug in the power adapter – the on/
charging indicator (1) will light up red.
•
The full charging time for the battery is 8
hours; do not exceed it to avoid reducing
the battery operating life.
•
After the battery is charged, remove the
hair clipped from the support (6), the indi-
cator (1) will go out.
Notes:
•
Before the first usage of the unit, charge
the batteries for 8 hours.
•
Do not charge the battery at temperature
below 0°C and above +40°C.
•
If you have not used the hair clipper for
a month or more, charge it completely
before use.
•
You can charge the battery, connecting
the plug of the power adapter (9) directly
to the jack on the unit, without using the
support (6).
Operating the hair clipper with
power-line supply
If you want to continue using the unit at
partially discharged battery, disconnect the
plug of the power adapter (9) from the jack on
the support (6) and connect it directly to the
jack on the unit, connect the power adapter
(9) into the mains socket, switch on the unit
setting the power switch (2) to the «ON» posi-
tion, the indicator will light up orange.
HAIR STYLING INSTRUCTIONS
•
The hair should be clean and dry.
•
Before cutting hair switch the hair clip-
per on and make sure that the hair clipper
operates normally and the blades move
smoothly. If there is extra oil on the blades,
wipe it with a dry cloth.
•
During operation with the unit connected
to the mains, always check the power
cord condition, do not allow its multiple
twisting, periodically turn off the unit and
straighten the power cord.
•
Seat the person so that his/her head is
approximately at your eye level, cover the
shoulders of the person with a towel and
comb the hair.
Reminder
•
Always cut off a little amount of hair at a
time; if necessary you can always return
to the cut off part and trim off addi-
tional hair.
•
The best haircutting results are reached
on dry hair, not wet.
•
Comb the hair to reveal uneven locks.
•
It is better to leave longer hair after cutting
for the first time.
•
After learning your clipper better, you will
be able to arrange your hair in any style
you need.
Cutting with usage of the universal
attachments (7) and (8)
Each universal attachment (7) and (8) has
5 positions for hair of different length, which
are marked on the attachment extension
scale (3):
–
attachment (7): for 3 mm, 6 mm, 9 mm,
12 mm, 15 mm hair length;
–
attachment (8): for 18 mm, 21 mm,
24 mm, 27 mm, 30 mm hair length.
VT-2572_105 x148.indd 5 10.03.2016 14:07:18