Vitek VT-2569, Инструкция по эксплуатации

Страница: 8 / 52

8
ENGLISH
Step one
Set the 3 mm attachment comb (6) or 6 mm attach-
ment comb (7). Switch the unit on using the power
switch (1), setting it to position «I». Hold the hair clipper
with the blades pointed upwards. Start cutting from the
beginning of the hair growth. Slowly move the trimmer
upwards. This way cut the head back area at neck bot-
tom and near the ears (pic. 3, 4, 5).
Step two
Switch the hair clipper off with the power switch (1) by
setting it to the position «O», unplug the unit, then set
the 9 mm attachment comb (8) for longer hair or 12 mm
attachment comb (9) and continue cutting hair near top
of the head (pic. 6).
Step 3 – cutting in the temples area
Switch the hair clipper off and unplug it, then set the 3
mm attachment comb (6) or 6 mm attachment comb (7)
and cut hair in the area of temples. Then set the 9 mm
attachment comb (8) or 12 mm attachment comb (9)
and continue cutting towards the top of the head (pic. 5).
Step 4 – cutting the crown of the head
Using the 9 mm attachment comb (8) or 12 mm attach-
ment comb (9), cut the hair on the top of the head towards
the crown against the hair growth direction (pic. 6).
•
You can cut hair against and along the direction
of hair growth, but keep in mind that the hair cut
against the growth will be shorter than the hair cut
along the growth.
•
Use the 3 mm attachment comb (6) and 6 mm
attachment comb (7) for very short haircut. To
leave a little longer hair, use the 9 mm attachment
comb (8) or 12 mm attachment comb (9).
•
To leave longer hair, grip hair locks between your
fingers and cut the hair off using the clipper (pic. 7).
•
You can use the comb: lift the hair locks and cut them
with the hair clipper above the comb (11) (pic. 8).
•
Always start cutting from the head back.
•
Comb (11) the hair to reveal uneven locks.
IM VT-2569_70x130.indd 8 24.12.2018 12:23:14