6
ENGLISH
•
Open the heating plates (1), to do this press them togeth-
er and set the lock (3) to the position
.
•
Insert the power plug into the mains socket.
•
To switch the unit on, set the switch (5) to the «ON» posi-
tion; the indicator (6) will light up.
•
Hang the unit on the loop (4).
•
Let the unit heat up for several minutes.
•
After several minutes the heating plates will heat up to
operation temperature and then you can start straight-
ening your hair.
•
Divide the hair into locks not wider than 4-5 cm each.
•
Place the hair lock between the plates (1) and press them
together. During operation hold the unit by the handle (2)
only, do not touch the straightener body, the body edges
and the heating plates (1).
•
Wait for several seconds and slide the straightener
throughout the hair length, slightly pressing the plates.
•
Repeat the procedure till you finish straightening your
hair.
•
After finishing the straightening procedure, switch the
unit off by setting the switch (5) to the «OFF» position, the
indicator (6) will go out. Unplug the unit.
•
Hang the unit on the loop (4) and let it cool down com-
pletely.
•
Press the plates (1) together and set the lock (3) to the
position to fix them.
CLEANING AND CARE
•
Before cleaning, unplug the unit, hang it on the loop (4)
and let it cool down completely.
•
Do not immerse the body, the power cord and the power
plug of the unit into water or other liquids.
•
Wipe the outer surface of the body and the heating plates
(1) with a soft damp cloth.
•
Do not use abrasives and solvents to clean the unit.
STORAGE
•
Let the unit cool down completely and make sure that the
unit body is clean and dry before taking it away.
•
Press the plates (1) together and set the lock (3) to the
position to fix them.
•
Never wind the power cord around the unit, as it can
damage the cord.
•
Keep the unit away from children in a dry cool place.
VT-2317.indd 6
13.10.2017 15:43:49
