6
ENGLISH
•
Put the unit on the safety stand (8) on a flat heat-resistant sur-
face and let it heat up (approximately 2-3 minutes). Use the
display (3) to control the heating temperature.
•
Take a hair lock with the free hand.
•
Press the clamp handle (4), place the end of the lock on the
operating surface (7) and move the clamp (5) down. Wind the
lock around the operating surface.
•
Wait for a while, then press the clamp handle (4) and release
the hair lock.
•
Repeat this procedure on the rest of your hair.
Note:
–
Do not touch the operating surface during the unit opera-
tion.
–
If during 60 seconds the buttons (9) are not pressed, the unit
will be automatically switched off.
–
During the first operation some foreign smell and a small
amount of smoke from the operating surface are possible,
this is normal.
–
During breaks in operation, place the unit on a flat heat-
resistant surface.
–
Do not comb your hair right after styling, let it cool off.
–
Divide big locks into smaller ones carefully to make the hair-
style look natural.
•
After you finish curling your hair, switch the unit off by press-
ing and holding the button (2) for 2-3 seconds, the display
(3) will go out.
•
Remove the power plug from the mains socket.
•
Put the unit on the safety stand (8) and let it cool down
completely.
CLEANING AND CARE
•
Before cleaning unplug the unit and let it cool down com-
pletely.
•
Do not immerse the unit, the power cord and the power plug
of the unit into water or other liquids.
•
Do not use detergents, abrasives, and any solvents to clean
the unit.
•
Clean the unit body with a soft, slightly damp cloth and then
wipe it dry.
STORAGE
•
Let the unit cool down completely and clean it before taking
away for storage.
Содержание VT-2310
Страница 1: ...1 Электрощипцы VT 8420 BK Сurling tongs 3 9 15 21 27 33 VT 2310 ...
Страница 2: ...6 5 4 10 7 8 1 9 3 2 ...
Страница 39: ......