Vitek VT-1980, Инструкция по эксплуатации

Страница: 6 / 64

6
ENGLISH
Stay motionless while weighing. Your
weight will be displayed (1) during 15
seconds, after that the scales will switch
off automatically (pic.7)
PERSONAL DATA INPUT
(as per the example of indicating the weight
in “kg”, the height data input in “cm”)
1. Switch on the unit by pressing the (6)
button.
2. Select the measuring unit by touching
the UNIT (7) button:
“ kg ” - weight will be indicated in kilo-
grams and the height in centimeters
“ st ” - weight will be indicated in stones
and the height in feet and inches
“ lb ” - weight will be indicated in pounds
and the height in feet and inches.
3. Touch the SET (8) button, number of
the user “Р0” will appear on the display
(pic.8).
4. Touch the (5) or (7) button to
select the user number. You may enter
data for 10 users - 0,1, …9. Confirm the
selection of the user by touching the
SET (8) button.
5. Touch the (5) or (7) button to se-
lect the gender symbol: - for men, -
for women, and , if you go in for sports
(pic.9, 10). Confirm the selection of the
gender by touching the SET (8) button.
6. Then the flashing “age” symbol will ap-
pear on the display (1), touch the
(5) or (7) button to enter your age in
the range from 10 till 80 years (pic.11).
Confirm the selection of the age by
touching the SET (8) button.
7. Touch the (5) or (7) button to en-
ter your height from 100 cm till 240 cm
(pic.12). Confirm the selection of the
height by touching the SET (8) button.
8. After entering all the data “0.0 kg” will
appear on the display and the scales will
switch to the excess weight measuring
mode (pic.13).
Note:
- If time range between each personal
data input is more than 10 sec, the ap-
pliance will switch off automatically.
- If no data is entered in the memory the
appliance will measure fat, water, mus-
cles and bone mass percentage of a 25
years old male 1.65 m in height.
CALCULATIONS ACCORDING TO THE
WEIGHING RESULTS
1. Touch the SET (8) button to switch on
the scales.
2. Touch the (5) or (7) button to se-
lect the user number and confirm it by
touching the SET (8) button.
3. Subsequently touching the SET (8) but-
ton you can view the personal data (gen-
der, age, height).
4. After indication of the height data, “0.0
kg” and the user number “P0” will ap-
pear on the display (pic.13).
5. Stand on the scales barefoot in such
a way that your feet and heels are on
the upper and lower contact pads (2
and 4), evenly distribute your weight
(pic.14). Stay motionless while weigh-
ing. Your weight will appear on the dis-
play (1), when the moving symbol “о”
appears, calculation of the percentage
of fat “FAT”, water “TBW”, muscles mass
“MUS” and bone mass “BONE” in the
human body is being performed.
6. The data will appear on the display
(1), percentage of fat “FAT” (pic.15),
water “TBW” (pic.16), muscles mass
“MUS” (pic.17) and bone mass “BONE”
(pic.18).
7. The results of the calculations will be
displayed (1) twice, after that the scales
will switch off.
WHAT IS EXCESS WEIGHT?
It is well known that excess weight may
negatively influence the health.
Excess weight may cause fatness, heart
1980.indd 6 1980.indd 6 31.01.2011 16:26:26 31.01.2011 16:26:26