6
ENGLISH
unscrew the fixing nut of the rear grid (4) and
remove the grid (7).
•
Unscrew the clamp (11) and remove the motor
unit (9) from the telescopic bar (12).
•
Unscrew the clamp (17) and remove the tele-
scopic bar (14) from the base (15).
•
Pack the fan into the original package and put
it away for storage in a dry cool place away
from children and disabled persons.
DELIVERY SET
Motor unit – 1 pc.
Front grid – 1 pc.
Blade clamp – 1 pc.
Blades – 1 pc.
Rear grid – 1 pc.
Telescopic bar with the clamp – 1 pc.
Base – 1 pc.
Remote control – 1 pc.
Instruction manual – 1 pc.
TECHNICAL SPECIFICATIONS
Power supply: 230 V ~ 50 Hz
Rated input power: 75 W
Blades diameter: 40 cm (16”)
Remote control: 3 V 2 «AAA» batteries 1.5 V
(not supplied)
The manufacturer preserves the right to change
design, structure and specifications not affecting
general principles of the unit operation without a
preliminary notification due to which insignificant
differences between the manual and product may
be observed. If the user reveals such differences,
please report them via e-mail [email protected]
for receipt of an updated manual.
RECYCLING
For environment protection do not throw out the
unit and the batteries (if included), do not discard
the unit and the batteries with usual household
waste after the service life expiration; apply to
specialized centers for further recycling.
The waste generated during the disposal of the
unit is subject to mandatory collection and con-
sequent disposal in the prescribed manner.
For further information about recycling of this
product apply to a local municipal administration,
a disposal service or to the shop where you pur-
chased this product.
The unit operating life is 3 years
Guarantee
Details regarding guarantee conditions can be
obtained from the dealer from whom the appli-
ance was purchased. The bill of sale or receipt
must be produced when making any claim under
the terms of this guarantee.
This product conforms to the EMC
Directive 2014/30/EU and to the Low
Voltage Directive 2014/35/EU.
IM VT-1940.indd 6
12/4/19 8:54 AM