Vitek VT 1645 GY, Инструкция по эксплуатации

Страница: 5 / 32

5
enGLish
5
6. Install the motor unit (2) onto the bowl cover and insert the power cable plug in the wall socket.
7. To turn on the chopper, press the ON button (1). The device has two operation speed modes, you
can switch between them by pressing the ON button. Before removal of the motor unit, wait until
the blades are fully stopped.
8. When processing firm products, use the pulse operation mode (switch on the chopper for some
seconds, make a pause and switch on the chopper again).
The mini-chopper can process products very quickly, but maximum time of continuous work should
not exceed 10 secs. Before further operation of the chopper, a break should be made in order to cool
down the motor.
Before removing the products from the bowl, disconnect the device from the power supply.
1. Remove the motor unit (2) from the chopper bowl.
2. Remove the cover (3), for that slightly turn it counter-clockwise (Fig.2) .
3. Take the blades (5) and (4), holding them for plastic tail.
4. Get the products from the chopper bowl.
recoMMendAtions And Advice
• This device is equipped with interlock system, which does not allow the device operation if the
cover (3) is not installed.
• The mini-chopper is intended for fast chopping of meat, cheese, onion, savoury herbs, garlic, car-
rots, walnuts, almond, fruit.
recommendations on processing products in the mini-chopper:
processed
product
Maximum
weight / volume
Maximum time of contin-
uous processing (sec)
recommended speed of
processing
Almond 100 g 15 High
Boiled eggs 200 g 10 High
Bread-
crumbs
20 g 15 High or low
Garlic 150 g By short pressings Low
Ham 200 g 15 High
Nuts 100 g 15 High
Ice-cream 200 g 20 High
Light dough 0.4 l 15 High or low
Onion 200 g By short pressings Low
Parsley 30 g 10 High or low
Pepper 0.2 l 30 High
Shallot on-
ion
200 g By short pressings Low
Seasonings 0.2 l 30 High
Stake 150-200 g 15 High
Walnut 100 g 15 High
Attention: the device is intended for processing small amounts of products. Do not exceed the
amounts specified in the table of Recommendations on processing products.
It is forbidden to chop very firm products, such as nutmegs, coffee seeds and cereals, ice or frozen
goods.
• Always install the main blade into the bowl before loading the products.
• Check up, whether the blade is correctly installed and whether it can freely rotate.
enGLish
1645.indd 5 26.11.2013 16:12:56