Vitek VT-1508, Инструкция по эксплуатации, Страница: 7 / 36

7
ENGLISH
10.
Remove the tip (5) from the cappuccinator
pipe (4) and put a suitable bowl under the
pipe (4). Press the button (9) “
” and wait
until the boiler heats up (the red light indi-
cator will glow constantly). Slowly turn the
steam supply control knob (3) «OFF--- +»
and switch the steam supply on for
10-15 seconds. Switch the steam supply off
by setting the control knob (3) to the posi-
tion «OFF».
11.
Repeat the procedure described in steps
7-10 not less than 3 times. Switch the coffee
maker off by pressing the button (13). Wait for
10-15 minutes.
12.
Switch the coffee maker on by pressing the
button (13) «
».
13.
Wait until the blue light indicator glows con-
stantly.
14.
With small intervals, repeat the boiler cleaning
procedure (clause 9) until the citric acid solu-
tion dissolves in the water tank completely.
15.
Fill the water tank (2) with clear water and
repeat the clauses 7-10 not less than 3 times
without the 10-15 minute break.
16.
Switch the coffee maker off by pressing the
button (13) «
».
Notes: - To remove the scale you can use spe-
cial descaling agents for coffee makers and cof-
fee machines, strictly following the instructions
on their usage.
CLEANING
–
If during the filter (15) cleaning you find out
that the openings are blocked with the ground
coffee remnants, you can clean them with a
small brush.
–
Clean the coffee maker body with a soft,
slightly damp cloth and then wipe it dry.
–
Do not use metal brushes or abrasives to
clean the coffee maker.
–
Do not immerse the power cord, the power
plug and the coffee maker body into water or
other liquids.
–
Wash the removable parts of the coffee maker
(3, 6, 7, 15, 16) with warm water and neutral
detergent, rinse them and dry.
Drip tray and grid (6)
–
Remove the grid (6) from the tray, remove the
tray and pour out water, wash the tray and put
it back to its place, put the grid (6) on the tray.
STORAGE
–
Before taking the unit away for storage,
unplug it and let the unit cool down com-
pletely.
–
Clean the unit.
–
Do not leave and keep the coffee maker in
places with the temperature below 0°C.
–
Keep the unit in a dry cool place away from
children and disabled persons.
TROUBLES AND TROUBLESHOOTING
Problem Cause Solution
The unit can’t be
switched on No voltage in the mains socket.
The power plug is not completely
inserted into the socket. Make sure that the plug is operating.
Check whether the plug is completely
inserted into the socket.
Water leaks from the
lower part of the unit. The water tray is full. Pour out water from the tray.
Coffee leakage from
the filter holder Loose connection of the filter and
boiler gasket, ground coffee got
on the edges of the filter. Clean the edges of the filter.
Coffee
has a foreign smell Wrong process of scale removal
in the boiler.
Improper storage of coffee.
See the chapters “Before using the
unit”, “Descaling” and perform them
several times.
Use fresh ground coffee.
Keep coffee in a dry cool place.
Steam doesn‘t froth
milk Low temperature of outgoing
steam.
The bowl is too big or of improper
size.
You used skimmed milk. Froth milk only after the ready indicator
lights up.
Use narrow high container for frothed
milk.
Use only whole milk with fat content
4-6%.
IM VT-1508.indd 7 28.05.2019 14:43:55