Vitek VT-1478 W, Инструкция по эксплуатации

Страница: 5 / 56

5
ENGLISH
5
Hand Blender Set
deSCrIPtIOn
1. Speed control
2. Power button
3. Turbo mode button
4. Motor unit
5. Attachments release buttons
6. Blender attachment
7. Whisk gearbox
8. Whisk for liquid products
9. Chopper bowl gearbox-cover
10. Chopping blade
11. Chopper bowl
12. Anti-slip support/chopper bowl lid
13. Bowl for mixing products
14. Anti-slip support/bowl lid
15. Processor bowl gearbox-cover
16. Shredder
17. Graters holder
18. Processor blade
19. Lid clamp button (15)
20. Processor bowl
21. Anti-slip support
22. Pusher
23. Graters
IMPOrtant SaFeGUardS
Before using the unit, read the instruction
manual carefully.
• Use the unit only for the intended pur-
poses, as stated in the instruction.
• Before using the appliance for the first
time make sure that an electricity sup-
ply corresponds to the voltage of current
specified on the housing.
• Use the processor on the flat stable sur-
face.
• Before using the unit for the first time,
wash all the removable details which will
contact with products thoroughly.
• Be careful when holding grater attach-
ments or blades, as they have sharp
edges.
• Do not use the unit outdoors.
• Always unplug the unit before cleaning,
assembling, replacing of the attach-
ments or if you do not use it.
• Do not wash the motor unit under a jet of
water.
• In order to avoid risk of electric shock or
fire, do not immerse the motor unit into
water or other liquids. If the unit fell into
water:
- do not touch water;
- unplug the unit immediately, only after it
you can take the unit out of water;
- apply to the authorized service center
for testing and repair of the unit.
• Do not put the attachments in a dish wash
machine.
• Do not touch the rotating attachments of
the unit, wait till they stop completely.
• Do not leave the operating unit unattend-
ed.
• Do not allow hair or clothes edges get
into the blades rotating zone.
• Never push the products with your fin-
gers or using other objects into the throat
of the cover while the unit is operating.
Use the pusher for this purpose.
• Firstly remove the attachments with sharp
edges and then take out the products.
• Use only the attachments supplied.
• Wait till the motor stops completely be-
fore removing the attachments.
• Switch off the unit and take the plug out
of the socket before removing any at-
tachment.
• Do not overfill the bowl for mixing prod-
ucts.
• Products should be put into the bowl be-
fore switching on the unit.
• Do not mix/whisk hot liquids. Let them
cool down.
• Never use the unit for mixing/chopping
of nonfood products.
• Provide that the power cord does not
touch sharp objects and hot surfaces.
• Do not use the unit near hot surfaces
(gas or electric stove, oven).
1478.indd 5 01.12.2011 14:20:55