background image

Operating Instructions

5. DAY & NIGHT

DAY/NIGHT is used to control the setting during day-time and night-time operation.

Select the mode according to the light condition and the camera types.  

4. XD-NR (Digital Noise Reduction)

DNR function improves picture quality by filtering out signal noise which is generated

under low light conditions. Set off, low, middle or high level. 

XDNR(3-dimensional noise reduction) which reduces the noise by multi frames.

It is effective at low light. Setting high is strength of noise reduction but the result

may occur in loss of sharpness and the tail effect of a comet.

MENU V1. XX

1. ZOOM/FOCUS

2. EXPOSURE

3. SCENE ENHANCE

4. 3D-NR

5. DAY/NIGHT

6. PICT. ADJUST

7. SPECIAL

8. SYSTEM

9. EXIT

WDR

MIDDLE

SAVE

EXTERN

DAY or NIGHT is determined by

the built-in light photo sensor.

Camera with IR LED must be set

to EXTERNAL.

5. DAY&NIGHT

SMART IR

ANTI-SAT.

DELAY

IR LED CTRL

RETURN

ON

AUTO

MIDDLE

llllllllllllllllllllll

10

5-1. EXTERNAL

5-1-1. SMART IR
SMART IR can be set to reduce the saturation by strong IR illumination at

night in any menu of EXTERN, AUTO and B/W(NIGHT). Set to ON, SMART IR

is enabled and ANTI-SAT. level is controlled. 

31

Содержание VIRTUOSO VTC-CB4MZ39













































Отзывы: