Vitek VIRTUOSO VTC-CB4MZ39, Руководство пользователя

Страница: 20 / 44

Operating Instructions - VTC-IR4MZ39
Setup menu can be accessed and controlled by OSD control joystick on
the side of camera unit. Five commands are available with the joystick.
The design of OSD could differ depending on the model.
Description of joystick operation
2) UP/DOWN ( ) : Choose the desired sub-menu and move the cursor up or down.
3) LEFT/RIGHT ( : Set up the value of the selected menu.
Used to adjust the desired menu selection and to move the cursor left or right.
Using OSD controller
4) ‘
’
denotes pressing straight down for 2 seconds
Video Sub-out
Connector
OSD Control Joy Stick
SUB-OUT
ZOOM
Cover Open
Description of the Motorized ZOOM&FOCUS* adjustment
1) : Zoom In
2)
3) : Focus Near
4)
(*) Works only when OSD Menu is inactive.
ANALOG OUT should be set to TVI MODE, AHD MODE or CVI MODE
to get CVBS video in sub-out. If it is set to CVBS, there is no CVBS video
in sub-out port. (SYSTEM> OUTPUT> ANALOG OUTPUT)
If CVBS video is enabled through ANALOG OUT or Sub-out port, WDR
and 3D-NR functions are disabled in all video outputs.
This should be considered when installer adjusts the video with installation
monitor via CVBS video signal.
20 21