Installation Instructions
Mounting Screw
: 4x30mm
L-Wrench
L-Wrench
1. Attach the mounting template at the installation site and drill three holes
for mounting on the ceiling or wall.
2. Route the power cable to the connecting place and place the bracket on the
pre-drilled position.
3. Attach the camera bracket using mounting screws.
4. Adjust the camera’s viewing angle by using the L-Wrench supplied. (Refer to ‘TIP’ )
5. Put the sunshield onto the camera unit and tighten the sunshield-bolts.
1
2
3
Plastic Anchor
: 6x30mm
• Before installation, adjust the ‘Tilt’
and ‘Rotation’ angle.
[ TIP ]
• Before installation, adjust the ‘Pan’ angle.
[ TIP ]
5
