Installation Instructions
• When reattaching the front lens cover make sure that the rubber gasket is
properly seated. Do not over tighten lens cover
CAUTION
• Extreme care should be taken NOT to scratch the window in front of lens.
• Care should be taken that the cable is NOT damaged, kinked or exposed in
a hazardous area.
• Do not point the camera lens directly at a strong light source such as the sun or
spot light.
Pan & Tilt Adjustment
3) Inclination
: Adjusts
horizontal image
alignment.
2) Tilt:
Adjusts view angle
1) Pan:
Adjusts view direction
Loosen screws at the side of the bracket as illustrated below to adjust all three
axes at once.
L-Wrench
Installation and commissioning Instructions
• Make sure power is removed before the installation.
• After all connections are properly finished, follow this order for applying power.
a) Plug the network cable into RJ-45 Ethernet Port.
If PoE is the unique power, there will be no need to connect Power terminal.
b) When 12VDC Local power is necessary, connect power cables
first, then plug the AC adapter into AC outlet to avoid damage.
Power Supply Connections
Camera can work with either 12VDC or PoE(IEEE Std. 802.3af).
Primary and secondary grounds are completely isolated to avoid possible
ground loop problems.
► When PoE and Local DC power are connected at the same time,
Local power has priority.
6
7
