HD-SDI CAMERA
57
When you enter the pan limit mode, the PTZ dome camera moves to 90° vertically
automatically if the PTZ dome camera is positioned over 90° vertically
10.7.5 CALIBRATION
Reset Origin
: Calibrate the ORIGIN point.
Offset Origin
: Adjust the small amount of position error from re-installation.
Offset
: To enable the origin offset, set the “Offset” option to Enable.
Auto Calibration
: Enables the auto calibration function
10.7.6 Password SETUP
The access to the PTZ dome camera configuration menu (DOME MENU) can be
restricted by a 4-digit password.
By default, the password protection is disabled (Enable Password :OFF).
The default password is 1111.
Edit Password
1.
Select Edit Password.
2.
Edit the password number (0– 9) to use Joystick(left/right : cursor, up/down:
number increase/decrease)
3.
Move to the next digit and repeat the last steps four digits.
PASSWORD SETUP
Enable Password
:OFF
Edit Password
:
Confirm Password
:
Save and Exit
Calibration
Origin Offset : 000.0,000.0
Origin Enable : Disable
Auto
Calibration :On
Exit
Содержание OnCue VT-PTZ230HD
