5
2. Wear insulating gloves and protection glasses during installation and connection of the set to prevent
electric shock or other injuries.
n
No Wet
1.
Do not allow water and/or foreign objects inside the module
2.
Water or foreign objects inside the module can cause a fire or electric shock.
3.
Should this occur, however, turn off the “POWER ON/OFF” switch on the controller to shut down, and
remove the power connector from the POWER CONNECTOR terminal of the module.
n
Do not disassemble
Do not open the set unnecessarily. Opening and modifying the set can cause a fire or electric shock.
n
Prohibited
Do not cover the vent. If the vent is covered, heat may build up inside the set and cause a fire.
1. Do not put the set in a poorly ventilated and narrow space.
2. Remove any dust buildup in the vent.
3. Do not place the set upside down or sideways.
4. Do not place on a shag carpet or bed.
5. Do not cover the vent with a cloth, etc.
n
Instruction
Install in a stable place.
1. If you install the set in an unstable place, such as an unstable rack, it may fall and cause injury.
2. Do not install upside down or sideways. The set may drop and cause injury.
n
Instruction
Use the designated packaging materials for transportation. If you do not use the designated packaging
materials, the packaging material may be damaged by vibration during transportation and it may cause
injury.
n
Instruction
Install based on the designated way of installation. If you do not follow the designated way of installation,
the set may drop due to the strength poverty and can cause injury.
n
Instruction
If you ignore any of the following instructions, it can cause injury or damage to nearby
products.
Caution
Website: www.
vitechpower.com.au
