4
n
Instruction
Use designated cable. A non-designated cable use can cause electric shock. Be sure to use the cable
designated in this manual.
n
Prohibited
Do not damage cables. If you damage a cable, it can cause a fire or electric shock.
1. Do not work over or damage a cable.
2. Do not place heavy objects on a cable or pull the cable.
3. Do not place a heater near the cable, which may result in the cable overheating.
4. Do not tuck down a cable when installing in a rack.
5. When you unplug a communication cable, be sure to hold the plug and pull it.
n
Instruction
Connect a power cable and communication cable properly.
1. If you connect a power cable improperly, contact resistance will increase and it may damage the parts
or cause a fire.
2. Insert the connector of the communication cable all the way in. If it is connected improperly, the system
may be deactivated.
n
Prohibited
Do not install in a closed area. If the module/controller is installed in a closed area with no air-conditioning,
heat may build up inside the set and cause a fire.
n
Prohibited
Do not place the set in direct sunlight or near a heater. Doing so can cause deformation, a breakdown,
or a fire. Pay extra attention when you place the set near windows.
n
Prohibited
Do not install the set where excessive oil smoke, steam, moisture or dust is contained in the air. If the set
is installed in such a place, it may cause a fire or electric shock.
n
Instruction
1. Wear insulating gloves and protection glasses during installation and connection
If you do not follow the instructions below, it can lead to a fire or electric shock causing
serious injury or death.
Warning
Website: www.
vitechpower.com.au
