6
The clips connecting the bypass assembly to the valve are inserted in the downward direction when the
inlet and outlet ports are facing downwards. The locking clips are inserted in the upwards direction from
the bottom when the inlet and outlet ports are upwards.
When the bypass assembly is in service mode the soft water is delivered to the building. During
regeneration cycle hard water is delivered to the water softener while also providing hard water to the
building distribution system.
b
ypass
a
ssembly
wiTh
inleT
and
ouTleT
porTs
faCing
upwards
)
b
ypass
a
ssembly
wiTh
inleT
and
ouTleT
porTs
faCing
downwards
)
Locking Clips
i
nsTallaTion
i
nsTruCTions
Assembling the Water Softener:
CAUTION: When maneuvering
the resin tank into the cabinet
do not attempt to lift the resin
tank by the top cover.
Rotate the valve and resin tank on the
ground to maneuver it into place for
the installation.
Fig. N
Fig. O
Locking Clips
6.
7.
8.
Please check that the flow
meter cable is connected on
the valve outlet port.
