Vitalograph VitaloJAK 7100, Инструкция по эксплуатации

Страница: 19 / 36

ENG
19 Page of 36
09260 Issue 1
Vitalograph VitaloJAK - Instructions for Use
Problem Fault
Symptoms:
• Attach cover warning displays and the
LED flashes RED.
Possible
Solutions: (In
probable order)
• The back cover of the device is not
securely attached to the device. Check
that the screw is sufficiently tightened (do
not overtighten).
• The door sensor has developed a fault,
contact support.
• If not recording, normal operation will
resume when the back cover is reattached.
• If recording, the recording stops with this
warning and an error is logged to the audit
trail. Subjects should contact their Site
Administrator. Site Administrator should
turn off the device and contact Vitalograph
support.
Problem Fault
Symptoms:
• Internal Memory Full Error displays and
the LED flashes RED .
Possible
Solutions: (In
probable order)
• Internal memory is full. Upload stored
recordings using the Webportal.
Problem Fault
Symptoms:
• Insert SD Card symbol (Green) displays
and the LED flashes RED.
Possible
Solutions: (In
probable order)
• The SD Card is full. Replace the SD Card.
• An SD Card is required but not inserted.
Insert an SD Card.