background image

AIM User Manual 

07608 

Issue A 

Copyright Vitalograph 2011                                                                                         DT_0006-8 

19 

 

G

UARANTEE

 

Subject  to  the  conditions  listed  below,  Vitalograph  Ltd.  and  its 
associated companies, (hereinafter called the Company) guarantee to 
repair  or  at  its  option  replace  any  component  thereof,  which,  in  the 
opinion  of  the  Company  is  faulty  or  below  standard  as  a  result  of 
inferior workmanship or materials. 
 
The conditions of this Guarantee are: 

1. 

This  Guarantee  shall  only  apply  to  hardware  defects  which  are 
notified to the Company or to its accredited distributor within 1 year 
of the date of purchase of the equipment, unless otherwise agreed 
in writing by the Company. 

2. 

Software (meaning computer software, or user installable modules) 
is guaranteed for 90 days from the date of purchase. 

3. 

The  Company  warrants  that  the  software  when  correctly  used  in 
conjunction with the hardware will perform in the manner described 
in  the  Company's  literature  and  user  manuals.  The  Company 
undertakes  to  rectify  at  no  expense  to  the  customer  any  software 
failure  notified  within  the  period  stated  above,  provided  that  the 
failure  can  be  recreated  and  the  software  has  been  installed  and 
used  in  accordance  with  the  user  manual.  Notwithstanding  this 
clause, the software is not warranted to be free of errors. 

4. 

This  Guarantee  does  not  cover  any  faults  caused  by  accident, 
misuse, neglect, tampering with the equipment, use of consumable 
items  or  parts  not  approved  by  the  Company,  or  any  attempt  at 
adjustment  or  repair  other  than  by  personnel  accredited  by  the 
Company,  nor  does  it  cover  reinstatement  of  any  configuration 
changes caused by the installation of any software. 

5. 

If a defect occurs please contact the supplier from it was purchased 
for advice. The Company does not authorize any person to create 
for it any other obligation or liability in connection with Vitalograph

®

 

equipment. 

6. 

This Guarantee is not transferable and no person, firm or company 
has any authority to vary the terms or conditions of this guarantee.

 

7. 

To  the  maximum  extent  permitted  by  law,  the  Company  does  not 
accept liability for any consequential damages arising out of the use 
of, or inability to use any Vitalograph

®  

equipment.

 

8. 

This  Guarantee  is  offered  as  an  additional  benefit  to  the 
Consumer's statutory rights and does not affect these rights in any 
way.

 

Содержание Aim 4500






















Отзывы: