Vital CNC Control User Guide
© 2014 Vital Systems, Inc.
11
Mach3 and Software Setup
Configuring the Default Profile
After the digital I/O and the drives have been properly wired, it is now time to switch ON your Vital CNC
Control.
NOTE: Your Vital CNC Control may be password protected on the windows log in. The default
password is “
CNC
”. It is recommended that the user change this to their own password.
NOTE: Although the purchase of a Vital CNC Control along with Maxsine Motors and Drives allows
Vital Systems to make several configurations within the factory, Digital I/O will have to be wired
manually and configured by the user to suit the target machine.
For a more detailed guide on using DSPMC with Mach3, please refer to the
Open Mach3 using the default profile provided. You should then see this window popup at the start of
Mach3. Select “M3dspMC” as shown in the picture.
A message like the one below should appear in the Mach3 Status Bar indicating that communication has
been established between Mach3 and the DSPMC.
