VITAECO HOTMIX PRO GASTRO, Инструкция по эксплуатации

Страница: 8 / 18

29 8
PRODUCT DESCRIPTION
1.Measuring cap
2. Cover
3. Magnet
4. Flaps for lid opening and closing
5. Lid gasket
6. Lid hole
7. Control Panel
8. Liquid Crystal Display
9. SD card
10. SD card compartment
11. ON / OFF
12. Stainless steel bowl
13. Stabilizing feet
14. Gauge
15. Heating element
16. Liquid leaking hole
17. Mixing paddle
18. Spatula
19. Blades
20. Blades’ locker
Optional accessories
21 Extra-sharped special blades
22 Stainless steel basket for steam
cooking
IN THE CASE....
The device does not turn on:
- Check that the plug is inserted into the socket.
- Check that the lid is closed completely, and there is no blinking icon on the
display.
The unit will stop automatically:
- Verify that you do not have introduced excessive amounts compared to what
the machine can accept and has not, thus leading to overheating as described
above (see section “thermostat”). In this case will be displayed “Er: 01”. Will be
enough to put the machine in stand-by and wait until the engine cools down,
because the apparatus is again ready for use.
The unit does not start and appears on the display “Er: 02”:
- It means that the unit has been exposed to an external temperature too low (eg
in case of transport, during the winter). Will be sufficient to place the device in a
normally heated and wait a few minutes.
The unit does not start (or stop responding during processing) and appears
on the display “Er: 03”. Means that:
1) Were introduced into the glass excessive amounts of ingredients. Will be
enough to empty a little the glass.
2) It was set a speed inappropriate to the type of processing. Will be sufficient
to correct the speed by pressing the button first. ... And follow the procedures
described in paragraph “2 - Correction of the data set.
The unit heats abnormally (i.e. too much or too little):
- Verify that the heating element is not dirty (in this case, see “Cleaning the
Unit”)
• The display lights up the icon of the “key”: the unit should be taken into a
service centre.