VITAECO HOTMIX PRO GASTRO, Инструкция по эксплуатации

Страница: 17 / 18

17 20
• The range of time varies from 5 seconds to 4 hours.
• After 60 minutes, and up to 4 hours, the steps will be 10 minutes at a time,
unless you use the “+” and “-” with small shots: in this case we can proceed
from minute to minute.
Steps of the clock:
<1min 1-5min. 5-10min. 10-30min. 30 - 60min. > 60min.fino to 4 hours
Every 5 sec. Every 15 sec. Every 30 sec. Every 1 min. Every 5 min. Every 10 min.
Every 10 min. with option of min. in min.
The display shows the remaining time of food preparation.
The unit stops automatically when it reaches the selected time and emits a beep.
TEMPERATURE
Temperature selection:
• Press the TEMPERATURE button
• Use “+” and “-” buttons to select the required temperature. The display will
show the set temperature.
• If you do not set any temperature as the machine has to work “cold”, the
display will show two horizontal lines to indicate that there is no heating
.
The temperature range varies from 25 °C (77°F) to 190°C (374°F)
.
Prepare first all those preparations that do not require the temperature
setting, so you do not have to wait for the unit to cool down for subsequent
food processing.
EXAMPLES OF WORK
NORMAL WORK:
• After introducing the ingredients into the bowl, close the lid properly.
• Press the SPEED button, then use the buttons “+” and” “-” to select the
required speed.
• Press the TIME button and then use the buttons “+” and “-” to select the
required time.
• Press the temperature button (if necessary), then with the “+” and “-” buttons
please select the required temperature.
• Finally, press the Start / Stop button (to operate the appliance).
PULSE WORK (work stopped):
When the unit is operating with the trend of the regular program:
• Press the PULSE button briefly- so the job will go from NORMAL to the
DISCONTINUED. The appearance of the appropriate icon on the display will
indicate that the function PULSE is on-going.
B. From the PC , after inserting the SD card into the appropriate card reader,
through the program into the Hotmix file it is possible to store number and name
of the recipe, number of the steps required to complete it, and the operating
parameters (SPEED, TIME and TEMPERATURE), besides writing ingredients and
related quantities.
A. To store a recipe directly from the machine :
•
Keep the MENU button pressed for at least 3 seconds.
•
Use the “ +” e “ -” buttons to let the Menu words flowing till selecting “STORE”,
and press the “START” button.
•
It is necessary to select the number of the recipe to be stored, by letting the
numbers flowing with the “+” and “-” buttons. Confirm the selected number
with the START button: in case the selected number is already assigned, the
indication “ATTENTION RECIPE EXISTING” will appear, and it will fade away
after 3 seconds; a “beep” will be then heard, and the display will go back to the
previous screen, in order to enable the selection of another number. In case the
selected number will be available, please confirm with the START switch, then
go ahead to the subsequent line.
•
The storage of a recipe should be made by dividing it into steps, starting from
1 upwards, using the “+” and “-” buttons. Then confirm with the START button,
and then go ahead to the subsequent screen of setting modes.
•
If when storing each step an already assigned number will be chosen, a “beep”
will be heard after 3 seconds and the display will go back automatically to the
previous screen, to enable the insertion of the correct number.
•
Once on the screen of the setting modes, select the SPEED digit with the “+”
and “-” buttons, and the PULSE switch as well if required, then press START to
confirm.
•
Now we go to the TIME setting mode. Please select the digits with the “+”
and “-” buttons, confirm with the START button, and then go to the next setting
mode.
•
So we get to the TEMPERATURE setting: please select the digit with the “+”
and “-” buttons, confirm with the START button, and then go to the next setting
mode, that is the selection of the accessory to be used.
•
Selection of the ACCESSORY: please go the requested accessory by the “+”
and “–“ buttons, then confirm with the START/STOP button.
•
All the set data are to be confirmed (or not) with the subsequent screen by using
the “+” and “-” buttons, to get positioned over YES, or NO and then pressing the
START/STOP button. If the data are confirmed, then the subsequent screen will
appear, otherwise it will go back to the initial screen. In both cases the name of
the accessory will flow on the display.