Vita Spa L700C Series, Руководство пользователя

Страница: 37 / 40

PAGE 33
SYMPTOM
Spa Inoperative
Spa Side Inoperative
MESSAGE
BJ2P
FLO
HILI
ICE
BLO
H1 or H2
HS1
HS2
LS1
LS2
LI
O3
LS=O or LS=S
SS=O or SS=S
PB
CP
ME A NIN G
Power failure outside of spa.
Spa Side could be locked.
Purging of plumbing.
Lack of water flow through Heater.
Overheating detected. 1 Heater off
at 110º F Pumps off at 112º F.
IF THIS HAPPENS A SECOND TI ME
IN A ROW,
DO NOT USE SPA. CALL
FOR SERVICE.
Water in plumbing below 50 F
Call for service if spa fails to come
on.
Blower inoperative
Heater Inoperative
PUMP 1 High-speed inoperative
PUMP 2 High-speed inoperative
PUMP 1 Low-speed inoperative
PUMP 2 Low-speed inoperative
LIGHT Inoperative
No light reading at ozonator
Water temperature sensor
High Limit sensor
Break in communication
Circulation Pump Inoperative
AC T I O N
Check power source Breaker and GFCI;
Reset breaker/GFCI. Call Electrician if it
will not start.
If lock icon is visible, unlock by depressing
the
“ UP ” button for 5 seconds
Normal system operation for one minute
each day at 10 AM and at 6 PM.
Remove filter and check for debris in
filter and filter adapter. If
”FLO” remains
check for closed gate valves or see
priming the pump.
SEE PAGE 15. Let water temperature
cool down to 104 F and reset by holding
”HEATER” button for 5 seconds or until
display returns to normal. If ” HIL I ”
message returns, turn power off to spa
for 15 minutes and then power up and
reboot to factory settings
No action required. Pump will come on
to circulate water and then heater.
Heater will stay on until water reaches
60 F or set temperature.
Turn power off to spa and check fuse.
Replace with 10 AMP MDL Fu s e .
Turn power off to spa for 15 minutes
Restore power and reboot to factory settings.
Turn power off to spa and check fuse
Replace with 25 AMP MDL Fuse.
Call for service.
Call for service.
See Replacement of spa light.
Press Jet button and cycle through.
Check for blue light emitting from
O z o n a t o r. Make sure that sensor is
attached to ozonator bib.
Reboot the factory settings
Reboot the factory settings
Reboot the factory settings
Call for service.
DI A GNO ST IC & TROUBL E SHOOT ING