OPERAT ING INST RUCT IONS
PAGE 12
INITIAL START UP
Your spa has been programmed for your
convenience. Once properly connected, the
H . E . E . T. circulation pump, heater and BiOzone
water purification system will automatically come
on, heat the spa to 102 F and introduce ozone 24
hours a day. Initial temperature, day, and time can
be set and changed by following these instructions.
A . S ETT ING PE RM A NENT TEMPE RAT URE :
1 . Press
“ PR O G ”
to enter the progr a m m i n g
mode. Notice the heater icon flashing.
2 . Press
“ UP ”
or
“ D OW N ”
arrows to choose the
desired temperature. NOTE: There is a
procedure to choose a different temperature
for each day of the week (See “A d v a n c e d
Features–Heat Days”).
B . S ETT ING CURRENT DAY :
1 . Press
“ V IE W ”
to show the day of week.
Notice the clock icon flashing.
2 . Press
“ UP ”
or
“ D OW N ”
to select the current
d a y. Choose 1 for Sunday, 2 for Monday, so
on and so forth up to 7 for Saturday.
N OTE: To change current day directly, do
s tep A1 & B1.
C . S ETT ING CURRENT TIME :
Press
“VIEW”
to show the Hour. Observe
the PM indicator. No indicator means AM.
Press
“ UP ”
or
“ D OW N ”
to select the
current hour. Press
“ V IE W ”
to show
the minutes. Press
“UP”
or
“DOWN”
to
select the current minute. NOTE: To change
current time at any time, press the
“PROG”
button and then press the
“VIEW”
button
twice to display time.
RET URNING TO REG ULAR DISPLAY :
Wait 30 seconds or press any button to exit the
p r o gramming mode.
NOTE: For best results, read each
step carefully and entirely before
proceeding to the next.
FIL L ING YO UR SPA
Wipe the interior of the spa with a damp, soft cloth
to remove any residue that may be on the surf a c e .
Fill with a garden hose by inserting the nozzle of
the hose in the filter inlet. (After filling is complete,
remember to put the filter cartridge in place prior
to starting the spa.) As the spa is filling, check in
the equipment access area for any leaks. On
occasion, it may be necessary to hand tighten a
union fitting that may have come loose during
transit. Also check that the gate valves are pulled
out to the open position and that the hose bib is
closed. Continue to fill to the water line.
N OT E :
If your water is extremely hard, it is
preferable to fill the spa halfway with hard water
and the rest with softened water. Never fill the spa
entirely with softened water.
V IE W
JETS
BLOW E R
L I G H T
F° / C°
PROGRA M
WATER LINE
