background image

PAGE 21

Your  Vita  Spa  has  been  designed  and

e n gineered for year-round use in any cli-
mate. If the spa will not be used, drain it
c o m p l e t e l y,  following  the  instructions  on
“ D RA INING THE SPA .”If you intend to use
the  spa  during  the  winter,  keep  the  spa
covered to prevent heat loss.

NATURAL REDWOOD

Although your spa came stained from the
factory, exposure to wind, rain and sun
will cause the wood to weather. Much
like any piece of furniture, if your spa
came with natural redwood, you will be
required to preserve it from time to time
(suggested minimum of two times per
year). Your Vita Spa is treated with a spe-
cially formulated “water-based” stain and
s e a l e r.  This  sealer  can  be  obtained
through your local Vita Spa dealer. DO
NOT USE URETHANE OR POLYESTER
COATINGS that will prevent the wood
from its need for natural moisturizing.

COVER MAINTENANCE

Your  cover  is  manufactured  from  a
durable marine grade, UV resistant mate-
rial.  Even so, monthly cleaning and peri-
odic conditioning is recommended to
maintain its beauty. To clean and condi-
tion the vinyl cover: Lightly spray the
cover with a garden hose to rinse it and
remove the debris. Using a large sponge
or soft cloth and a mild soap solution (1
teaspoon dish washing liquid with 2 gal-
lons of water), scrub lightly in circular
motion.  Then rinse it thoroughly with
plenty of water. Condition the vinyl after

cleaning by applying a thin film of vinyl
conditioner.  NOTE: To remove tree saps,
use lighter fluid (not charcoal lighter but
the  kind  used  in  cigarette  lighters). 
Use sparingly and rinse with mild soap
solution afterwards. Wipe dry.

CARE OF ACRYLIC SURFACE

To maintain the surface of your spa, sim-
ply clean with a soft damp cloth (a mild
detergent is okay) or with any glass
cleaner. DO NOT clean the surface with
any type of abrasive as it will dull the sur-
face and natural luster of the acrylic. DO
NOT use any type of oil based solvent.
Such products can be very harmful to the
surface of the spa and will void the sur-
face warranty of the spa.

CARE OF SPA PILLOWS

The spa pillows will provide years of com-
f o rt  if  treated  with  care.  Each  pillow  has
been positioned above the water level to
minimize  the  bleaching  effects  of  chlori-
nated water and other  spa  water chemi-
cals.  It  is  recommended  that  pillows  be
removed and cleaned each time the spa
itself  is  cleaned.  A  mild  soap  and  warm
water  works  best  in  removing  body  oils.
A LWAYS  rinse  the  pillows  off  thoroughly
after applying any type of soap to assure
that  no  residue  remains.  If  you  are  win-
terizing your spa or do not plan on using
it for a while, it is best to remove the pil-
lows  until  the  next  use.  Pillows  should
always be removed  whenever the spa is
being superchlorinated.

S PA MAIN T E N A N C E

Содержание L100 SERIES






































Отзывы: