PAGE 16
F. FLOW PROTECTION
If the flow of water through the heater is
insufficient, the spa controller will auto-
matically turn the heater off to prevent
overheating. The display will show “FLO”,
indicating a flow restriction caused by a
clogged filter, shut gate valves or by a
malfunction in the pressure switch. Call
for service if you cannot pinpoint the
cause.
G. OVERHEAT PROTECTION
If the water temperature inside the spa
reaches 112 F, the display will show
“
HILI
” (High Limit) and the heater will be
disabled. If the water temperature contin-
ues to rise and reaches 115 F due to fric-
tion in the pumps and plumbing system,
the entire system including all pumps will
be disabled. In “
HILI
” condition,
DO
NOT ENTERTHE WATER
. Remove the
cover and allow the water temperature to
cool down to 104 F. Then, reset the sys-
tem by holding down the “
PROG
” button
for 5 seconds while in time display
mode. If the “
HILI
” message returns, call
for service.
H. OZONE GENER ATOR MONITOR
If your spa is equipped with a Vitazone
ozone generator, the ozone bulb is mon-
itored by the spa controller. Should the
bulb burn out, or should the ozonator
fail, the message “03” will appear on the
display, signaling the need for service.
Note that this feature will not be available
if your spa is equipped with an ozonator
that is not a “VitaZone”.
ADD START UP CHEMICALS
Carefully follow the directions and add
the start-up chemicals recommended to
you by your dealer. Contact your dealer
to clarify any questions you may have.
Your spa comes ready for the Vita exclu-
sive
“Sparkle Clear”
natural mineral
purification cartridges. Combined with an
ozonator, “Sparkle Clear” offers an alter-
native to Bromine or other chlorine sani-
tizers. Sparkle Clear and ozone will make
your spa look cleaner, smell cleaner, feel
softer and eliminate skin or eye irritation.
Ask your dealer about Vita Spa’s “Sparkle
Clear” sanitizing alternative.
