VisuNet XT-9700, Руководство пользователя

Страница: 40 / 81

Vi
suNet
XT
9
700
Seri
es
38
VisuNet XT 9700 Series
Calibration and Operation
Perform the following steps to realign the touch screen using the Elo touch screen software.
1. Close any open programs prior to initiating the Elo program.
2. Right-click the Elo icon and select Align from the dialog box, or double click the Elo Touch
screen icon, select the General tab and click the Align button.
3. A white screen appears with a target in the top left corner of the screen. See Figure 6.3 .
4. The target calibration points are presented one at a time. (25 main screen target points and
4 corner target points) Touch and then release each of the targets as they appear.
Figure 6.3 Calibrating the Targets
5. After the target points have been calibrated, you are prompted to touch the screen in
different areas to check calibration and cursor response. The cursor should jump to your
fingertip. See Figure 6.4 .
6. Run your finger around the screen to make sure the cursor stays with your fingertip.
7. If the cursor responds correctly, touch the green check mark.
8. If cursor response is questionable, press the Repeat icon and repeat the calibration
procedure.
Figure 6.4 Check Cursor Response